Single Stage Hammer Crusher

• Product Details

Single stage hammer crusher is the heavy hammer crusher, and it can be used for the crushing operations of limestone. The large single-forging hammer crusher can be directly crush the limestone 1000mm in diameter to about 20mm, with a powerful crushing capacity.

This series of product is applicable for the limestone, gypsum, coal, limestone, sandy shale with the crushing compression strength not more than 200Mpa. It is used in the crushing and screening equipment in the fields of mineral processing, building materials, water conservancy, chemical industry, etc.

Features and performance of single stage hammer crusher:

1. Large feeding size (-1300mm, +500mm), fine discharging size (D80≤8mm), High capacity and large crushing ratio.

2. Hammer head is made of AMC composite material which is developed by our company independently. The service life of the hammer is 50-150% longer than the hammer which is made from Mn18Cr2MoNbRe.

3. Low power consumption, easy maintenance and low operation expense, can save the management fee by 30-40%.

4. When it used for the sandstone material crushing, the discharging size can be adjust from 3-30mm.

5. Simple process flow, the floor area can be reduced by 40-60%.

6. The discharging grid plate is adjustable; it can adjust the product size and meet the different requirement of clients.

7. The service life of the wear parts is very long, Maintenance frequency is greatly reduced.

Single Stage Hammer Crusher Working Principle

The large material is fed into the cavity, and then stacked on the airframe in the machine. The hammer are working in the middle of the gaps in bracket, breaks the material continuous and fall down, the small material is stroke again by the high-speed hammer, finally discharging from the grid plate.

Hammer crushers are main equipment for intermediate crushing the limestone, coal and other brittle materials below medium hardness in mining, constructing, chemical and power stations. The crushers have the feature of high crushing rate, high output rate and their products have even grains.

According to the structure, hammer crusher can be divided into horizontal type hammer crusher and vertical hammer crusher. According to the using requirements, hammer crusher can be divided into reversible, irreversible hammer crusher, single stage hammer crusher and dry-type hammer crusher. Reversible hammer crusher with reversible rotor used for fine crushing in general; irreversible hammer crusher with irreversible rotor used for intermediate crushing. 

EO has more than 60 years history of designing and manufacturing hammer crusher. Over 1000 sets of hammer crusher were produced and exported to many other countries. EO hammer crusher is been produced in series. These products are welcomed by customers for their variety of models, advanced design, reliable capacity, stable running and low consumption of energy.

EO is the presiding company for making the occupation standard hammer crusher for coal JB/T 3765—2008 and hammer crusher for limestone JB/T 3766—2008.

Our Services:

Pre-sale services: enthusiasm

We provide you with the process plan, process flow design and manufacturer equipment according to your special demand.

Sale services: servant

Send technicians to the job site for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

After-sale services: faithfulness

To establish long term friendship, we will regularly pay return visit to customers.

In addition, we provide one-year warranty to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

• 

  PEJ Jaw Crusher

• 

  Smooth Roll Crusher

• 

  Drying Hammer Crusher

• 

  PCH Ring Hammer Crusher

• 

  High Performance Rotary Crusher

• 

  Triple-bin Tube Mill Machine