Office Mob: +8615524105871
Office Tel: +86-024-31931990
Office Fax: +86-024-22845391
Email: info@eoexport.com
Roll Crusher Introduction:
The roll crusher is suitable for crushing medium, high hardness materials in metallurgy, building materials, refractory materials. This series of crusher is mainly composed of a roller, the roller support bearings, compaction and adjusting device and the drive components.
The grain size regulation: wedge or gasket adjusting device is arranged between the two roller, the top of the wedge device with adjusting bolt, when adjust the adjusting bolt will pull up the wedge, the wedge will move the activities roller from fixed wheel.
Characteristics of Roll Crusher:
1. the main structure of the gear transmission device: fixed roll, active roll, drive shaft, the body, chassis, shell, long gear cover parts.
2. machine power is spread by a triangle belt motor wheel, and then through a pair of intermediate decrease gear, make the fixed roller rotation, then drive the movable roller by the other fixed on the end of a long gear, the two roller relative movement to crush the materials.
3. With the shaping functions, a cubic-shaped products, large packing density.
Second Floor, No.29 Shiyiwei Road, Heping Liaoning Shenyang.
Email:info@eoexport.com
Office Mob: +8618002480485
Office Tel: +86-024-31140175
Office Fax: +86-024-22845391
+86-024-31931990
